I think it is easier to setup VOX in extensions.conf (use Pv instead of P), then just use the mute button as your PTT. [myphone] exten => 28765,1,Rpt,28765|Pv ;|P for phone control exten => 29009,1,Rpt,29009|Pv ;|Pv for phone control w/vox Bob kk6ecm _____ From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bob Prybyzerski Sent: Wednesday, September 16, 2015 12:44 PM To: Bryan D. Boyle Cc: APP RPT Subject: Re: [App_rpt-users] using Zoiper The default should be *99 to start transmitting And # to stop and go back to receive. Sent from my iPhone Bob Prybyzerski 631-960-1051 On Sep 16, 2015, at 3:28 PM, Bryan D. Boyle <bdboyle@bdboyle.com> wrote: has anyone had any experience using Zoiper as an access app to asterisk? i can register, dial extensions, hear traffic, but am (admittedly) stumped as to what the ptt sequence is or should be. just wondering (this is on an iphone, btw). -- Bryan Sent from my iPhone 5...No electrons were harmed in the sending of this message. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.