I've been trying to install Asterisk on a CentOS 4.4 box for a while, but not with much luck. I got Asterisk compiled and the software installed. After a couple of issues finding the right kernel-devel package for my kernel, all seemed to install fine. I also installed chan_rtpdir (v 0.2 so far, though now I will need 0.5). However, when I try and start Asterisk, I get a segfault if there is anything at all in rpt.conf. While the idea of using a distribution like ACID or EVB is nice, I was forced to use a pre-existing system, so reformatting isn't an option. If I use the sample rpt.conf, Asterisk loads fine. However, as soon as I uncomment any line, then Asterisk dies with a segfault on the second pass of reading my rpt.conf. On my system, it reads and identifies the rtpDir link on the first pass and then dies on the second pass. For the record, I recompiled chan_rtpdir on my system to avoid library/compiler issues, which I did have also. Anyone have any ideas? Alternatively, are there some sample configs that can be used on an existing Asterisk box? I'm running no RF hardware on Asterisk at this stage. All paths to RF are via the rtpDir link. Eventually, I might add a remote base directly to Asterisk, or move the RF hardware to Asterisk. 73 de VK3JED http://vkradio.com