On Sun, Jul 27, 2008 at 5:49 PM, Steve Totaro <stotaro@totarotechnologies.com> wrote:
On Sun, Jul 27, 2008 at 4:53 PM, Tony Langdon, VK3JED <vk3jed@vkradio.com> wrote:
At 01:03 AM 7/28/2008, you wrote:
I hear you about not wanting to re-install a whole system from scratch.
That's because the system is used for other purposes.
A possible solution for your problem is to use a set of source files which is known to work together very well. Why not try downloading the files.tar.gz source file tarball from http://dl.allstarlink.org/installcd and unpack it in /usr/src? After unpacking, run ./configure, make and make install in the zaptel, libpri, and asterisk directories.
I was originally looking for a package that would install Asterisk and some suitable sample configs on an existing system, sort of like ACID or EVB without the base Linux system, but in any case, I'm open to this route. I did use the current Asterisk, Zaptel and libpri from the Asterisk site for my system.
Will consider it as a good option to try in any case.
73 de VK3JED http://vkradio.com
http://svn.digium.com/svn/asterisk/team/jdixon/chan_usbradio-1.4/ is up to date total Asterisk install. chan_rptdir is .5.
Thanks, Steve Totaro
I am doing a fresh install on FC8 with the instructions I posted above, will post results, my guess is "make samples" after making and installing chan_usbradio-1.4 (Asterisk 1.4 with additional code and channel driver) will populate /etc/asterisk/ with chan_usbradio-1.4 specific samples. Thanks, Steve T