Tom, That did the trick! Thank you. -- Chris Andrist, KC7WSU On Jan 22, 2013, at 9:00 PM, Tim Sawyer <tim.sawyer@mac.com> wrote:
In your node stanza:
duplex=0 linktolink=yes idrecording=
FYI... http://ohnosec.org/drupal/node/84 http://ohnosec.org/drupal/node/40
-- Tim :wq
On Jan 22, 2013, at 5:21 PM, Chris Andrist <chris.andrist@gmail.com> wrote:
I am converting my IRLP node to allstar.
I have tried lots of configuration, but can't get receive audio. TX Audio works just fine.
My repeater has a built in controller. I want allstar to get the receive audio from the repeater and pass it to the Internet. Take the audio from the Internet and key the repeater and pass the audio.
Repeater to URIx hookup. RX Audio -> URI Pin 21 TX Audio -> URI Pin 22 COR -> URI Pin 8 PTT -> URI Pin 1 Ground -> URI Pin 20
Here is what I would like it to do: 1. Do not repeat audio. 2. Use COR. No need to detect or transmit CTCSS the repeater does it very well. 3. No Repeater ID. 4. No courtesy tone. 5. No hang time.
Any help would be appreciated. I have tried 10-12 configurations and I feel like I am losing my mind.
Regards,
Chris Andrist, KC7WSU _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users