While I can't really speak to adjustments to zippor, But it sounds like your tx audio was low and you made up for it by boosting the tx level and not getting the rx audio correct. You can not adjust allison etc, so in order to have the 'correct balance', you must start with correct rx audio levels and make/adjust everything else to match. ...mike/kb8jnm On 10/21/2018 3:53 PM, Edbathgate wrote:
I was doing a scouting event, and experienced a number of the tx-ing stations with low audio, so I was cranking my volume and straining to hear the other stations, when a blasting disconnect message comes through.
I found settings of how to block the connect/disconnect messages.
There used to be 'ducking' settings in the Xipar distribution of allstar. Telemnomdb=-10, Telemduckdb =. -15. Do these still exist?
I just found linkmongain variable. Mine was still at zero. I may jack that up to compensate for low hub audio.
Anybody have suggestions to adjust the rx audio/hub audio/telemetry radios without severely blasting other users when I am connected into a hub?
Ed N3SDO _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.