I found a sample in /usr/src/configs/pciradio Here's my zaptel.conf tx=1000 ctcss=1000,1,1000 invertcor=y debouncetime=10 exttone=n channels=1 tx=1000 ctcss=1000,1,1000 invertcor=n debouncetime=10 exttone=n channels=2 be sure to do a "ztcfg -v" after edit... Zaptel Version: 1.4.12.1RPT_A Echo Canceller: MG2 Configuration ====================== 2 channels to configure. -- Tim :wq On Oct 23, 2009, at 12:33 PM, Iñaki Civico wrote: Hi all, i'm installing a system with Quad Radio card, but i can't find any documentation about zaptel.conf and zapata.conf files for this card. All seems to start ok but when i call rpt(${NODE}) i get this message: "rpt:Sorry unable to obtain Rx channel" In rpt.conf, rxchannel is Zap/1 and txchannel is Zap/2. I've followed zaptel.conf comments and configured channels=1-4 # cat /proc/zaptel/2 shows this: Span 2: PCIRADIO/0 "Board 1" 1 PCIRADIO/0/0 2 PCIRADIO/0/1 3 PCIRADIO/0/2 4 PCIRADIO/0/3 (Span 1 is ZTDUMMY) I don't know if channels in zapata.conf must be configured with any signalling type as with other cards like tdm400 or so. Can anybody help me or send any working example? Thanks in advance, /Iñaki Civico _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users