On 02/07/2014 03:22 PM, Bob Roszkowski wrote:
Group,
I have a site that is acting strange. I have a server with a VHF(Mastr II) and UHF(TKR-850) repeater, each with a URI. Both repeaters are linked together locally. I noticed while someone is using the machine, the TX will just stop while they are talking. If I switch to the other repeater, the TX is working fine. The URIs Red LED goes out. This happens to both machines. I have swapped and changed URIs and cables with no change. Any ideas?
I've had that here before too, Bob. Usually it takes a hard-boot (pull the power till the caps discharge) to clear whatever issue occurs on the USB buss. Typically, it happens after I'm on HF (Ts-2000) with the Amp (TL-922A) but barefoot, I don't have an issue. Even if I'm not on HF, this happens about once every 5 days, or so. Machine is a Dell SCR Poweredge 4500, Motorola R-100 and TM-V7A on 2m simplex. 73 = Best Regards, -Geoff/W5OMR