After going to the svn I was able to compile and run asterisk I have loaded the node 27821 configuration into the etc/asterisk/ directory (this node is down right now) and asterisk started, my led started to blink,on the URI, but it stopped right away. now in message.log thats what I see.. [Mar 7 22:36:05] NOTICE[4490] app_rpt.c: RPT thread restarted on 27821 [Mar 7 22:36:05] WARNING[4490] app_rpt.c: rpt_thread restarted on node 27821 [Mar 7 22:36:05] WARNING[4518] chan_dahdi.c: Unable to open '/dev/zap/pseudo': No such file or directory [Mar 7 22:36:05] ERROR[4518] chan_dahdi.c: Unable to dup channel: No such file or directory [Mar 7 22:36:05] WARNING[4519] chan_usbradio.c: File usbradio_tune_usb27821.conf not found, device usb27821 using default parameters. [Mar 7 22:36:07] NOTICE[4490] app_rpt.c: RPT thread restarted on 27821 [Mar 7 22:36:07] WARNING[4490] app_rpt.c: rpt_thread restarted on node 27821 [Mar 7 22:36:07] WARNING[4520] chan_dahdi.c: Unable to open '/dev/zap/pseudo': No such file or directory [Mar 7 22:36:07] ERROR[4520] chan_dahdi.c: Unable to dup channel: No such file or directory [Mar 7 22:36:07] WARNING[4521] chan_usbradio.c: File usbradio_tune_usb27821.conf not found, device usb27821 using default parameters. of course I did not set any sounf level cause when I try to do asterisk -r I receive this message: ========================================================================= Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?) I do have an asterisk.pid, but no asterisk.ctl.. Looks like I did not do something right... I am close, but no cake yet.. From: telesistant@hotmail.com To: petem001@hotmail.com; app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] phase2.sh wont do the job Date: Thu, 7 Mar 2013 18:15:28 -0800 I'm not sure why you would expect it to. phase2.sh, amongst other things, loads the CURRENT RELEASE of the sources which CLEARLY DO NOT support any of the Centos 6 things. As I said before, you need to load the SVN version of the sources and it will be much happier. https://allstarlink.org/support.html#astupgrade Jim From: petem001@hotmail.com To: app_rpt-users@ohnosec.org Date: Thu, 7 Mar 2013 20:29:52 -0500 Subject: [App_rpt-users] phase2.sh wont do the job Ok Like a few here knows, I am trying to install the acid version of app_rpt on a centos 6 linux. Someone kind enough gave me good info to start with and I've been able to do a lot.. but after modifying phase2.sh so that it can find its repo, I start it and here is the output.. ****** Phase 2 post install ****** Getting asterisk install script from http://dl.allstarlink.org... Getting files.tar.gz from http://dl.allstarlink.org... ****** Asterisk Installation ****** 7 Mar 20:19:01 ntpdate[5687]: the NTP socket is in use, exiting Unpacking files.tar.gz... Compiling Zaptel... checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking for GNU make... make checking for grep... /bin/grep checking for sh... /bin/sh checking for ln... /bin/ln checking for wget... /usr/bin/wget checking for grep that handles long lines and -e... (cached) /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for initscr in -lcurses... yes checking curses.h usability... yes checking curses.h presence... yes checking for curses.h... yes checking for initscr in -lncurses... yes checking for curses.h... (cached) yes checking for newtBell in -lnewt... yes checking newt.h usability... yes checking newt.h presence... yes checking for newt.h... yes checking for usb_init in -lusb... yes checking usb.h usability... yes checking usb.h presence... yes checking for usb.h... yes configure: creating ./config.status config.status: creating build_tools/menuselect-deps config.status: creating makeopts config.status: creating build_tools/make_firmware_object configure: *** Zaptel build successfully configured *** make[1]: Entering directory `/usr/src/astsrc/zaptel/menuselect' checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for GNU make... make checking for asprintf... yes checking for getloadavg... yes checking for setenv... yes checking for strcasestr... yes checking for strndup... yes checking for strnlen... yes checking for strsep... yes checking for strtoq... yes checking for unsetenv... yes checking for vasprintf... yes checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for initscr in -lcurses... yes checking curses.h usability... yes checking curses.h presence... yes checking for curses.h... yes checking for initscr in -lncurses... yes checking for curses.h... (cached) yes checking for pkg-config... pkg-config configure: creating ./config.status config.status: creating makeopts config.status: creating autoconfig.h configure: configuring in mxml configure: running /bin/sh './configure' --prefix=/usr/local 'CC=' 'LD=' 'AR=' 'CFLAGS=' --cache-file=/dev/null --srcdir=. checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for cp... /bin/cp checking for ln... /bin/ln checking for mkdir... /bin/mkdir checking for nroff... /usr/bin/nroff checking for rm... /bin/rm checking for strdup... yes checking for vsnprintf... yes configure: creating ./config.status config.status: creating Makefile config.status: creating mxml.list config.status: creating mxml.pc config.status: creating config.h configure: Menuselect build configuration successfully completed make[1]: Leaving directory `/usr/src/astsrc/zaptel/menuselect' make[1]: Entering directory `/usr/src/astsrc/zaptel/menuselect' make[2]: Entering directory `/usr/src/astsrc/zaptel/menuselect' gcc -g -c -D_GNU_SOURCE -Wall -I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -c -o menuselect.o menuselect.c gcc -g -c -D_GNU_SOURCE -Wall -I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -c -o strcompat.o strcompat.c gcc -g -c -D_GNU_SOURCE -Wall -I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -c -o menuselect_curses.o menuselect_curses.c make[3]: Entering directory `/usr/src/astsrc/zaptel/menuselect/mxml' gcc -O -Wall -c mxml-attr.c gcc -O -Wall -c mxml-entity.c gcc -O -Wall -c mxml-file.c gcc -O -Wall -c mxml-index.c gcc -O -Wall -c mxml-node.c gcc -O -Wall -c mxml-search.c gcc -O -Wall -c mxml-set.c gcc -O -Wall -c mxml-private.c gcc -O -Wall -c mxml-string.c /bin/rm -f libmxml.a /usr/bin/ar crvs libmxml.a mxml-attr.o mxml-entity.o mxml-file.o mxml-index.o mxml-node.o mxml-search.o mxml-set.o mxml-private.o mxml-string.o a - mxml-attr.o a - mxml-entity.o a - mxml-file.o a - mxml-index.o a - mxml-node.o a - mxml-search.o a - mxml-set.o a - mxml-private.o a - mxml-string.o ranlib libmxml.a make[3]: Leaving directory `/usr/src/astsrc/zaptel/menuselect/mxml' gcc -o menuselect menuselect.o strcompat.o menuselect_curses.o mxml/libmxml.a mxml/libmxml.a -lncurses make[2]: Leaving directory `/usr/src/astsrc/zaptel/menuselect' make[1]: Leaving directory `/usr/src/astsrc/zaptel/menuselect' Generating input for menuselect ... make[1]: Entering directory `/usr/src/astsrc/zaptel' make -C /lib/modules/2.6.32-279.22.1.el6.x86_64/build ARCH=x86_64 SUBDIRS=/usr/src/astsrc/zaptel/kernel HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="pciradio.o wcfxo.o wct1xxp.o wctdm.o wcte11xp.o zaptel.o ztd-eth.o ztd-loc.o ztdummy.o ztdynamic.o zttranscode.o wctdm24xxp/" modules make[2]: Entering directory `/usr/src/kernels/2.6.32-279.22.1.el6.x86_64' gcc -o /usr/src/astsrc/zaptel/kernel/makefw /usr/src/astsrc/zaptel/kernel/makefw.c /usr/src/astsrc/zaptel/kernel/makefw /usr/src/astsrc/zaptel/kernel/pciradio.rbt radfw > /usr/src/astsrc/zaptel/kernel/radfw.h Loaded 42096 bytes from file CC [M] /usr/src/astsrc/zaptel/kernel/pciradio.o /usr/src/astsrc/zaptel/kernel/pciradio.c: In function ‘pciradio_start_dma’: /usr/src/astsrc/zaptel/kernel/pciradio.c:1700: error: implicit declaration of function ‘set_current_state’ /usr/src/astsrc/zaptel/kernel/pciradio.c:1700: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) /usr/src/astsrc/zaptel/kernel/pciradio.c:1700: error: (Each undeclared identifier is reported only once /usr/src/astsrc/zaptel/kernel/pciradio.c:1700: error: for each function it appears in.) /usr/src/astsrc/zaptel/kernel/pciradio.c:1701: error: implicit declaration of function ‘schedule_timeout’ make[3]: *** [/usr/src/astsrc/zaptel/kernel/pciradio.o] Error 1 make[2]: *** [_module_/usr/src/astsrc/zaptel/kernel] Error 2 make[2]: Leaving directory `/usr/src/kernels/2.6.32-279.22.1.el6.x86_64' make[1]: *** [modules] Error 2 make[1]: Leaving directory `/usr/src/astsrc/zaptel' make: *** [all] Error 2 Failure: Unable to compile Zaptel 2 Fatal error: Unable to install Asterisk! a bit long but I dont see where its bugging and why, at first it was asking for gtk, so I did a yum install gtk-devel this got care of the complaning about gtk.. Of course I did a yum -y update before stating this. now anyone can help?? p.s. runlevel of the machine is 3 now going to take a look at astinstall.sh if there is something there that I did not see.. Pierre VE2PF _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users