It's been like this for a while now (check the archives). Just comment out the "talkover" one. --- On Fri, 6/8/12, Buddy Brannan <buddy@brannan.name> wrote:
From: Buddy Brannan <buddy@brannan.name> Subject: Re: [App_rpt-users] Double ID's To: "app_rpt mailing list" <App_rpt-users@ohnosec.org> Date: Friday, June 8, 2012, 11:38 AM This is a sort of long-standing thing, I'm also still seeing it. You'll get the talk over ID folioed by the regular ID, though not every time. -- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY
On Jun 8, 2012, at 12:16 PM, Alan Adamson <adamson_alan@hotmail.com> wrote:
HMM…
NOTE, I've recently updated to the latest svn and since then noticed this…
Anyone noticed that on an initial ID after setting idle for some time, when you have 2 nodes connected. When a signal comes in on the remote node, it causes the local node to start the ID, about 2/3 through, it cuts off the first one and immediately generates a second as if it were one complete ID.
Doesn't do it all the time… ….
Any idea what change in the code may have done this?
Alan
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users