I would be interested in this as well, so please keep me in the loop. I haven't done this yet but I am very interested. Corey N3FE ________________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of K&R Yoksh [yokshs@gmail.com] Sent: Wednesday, February 15, 2012 10:54 PM To: app_rpt Subject: [App_rpt-users] Icom 706 Remote Base Hello, I'm trying to get my Icom 706Mk2g to work as a remote base.. I'm not having any luck whatsoever.. I know that my hardware works 100%, but Asterisk cannot seem to talk to my radio. FWIW, I'm running SimpleUSB. I'm not sure if that makes any difference or not. I read somewhere that app_rpt uses decimal instead of hex (as Icom does) for the Ci-v address. So instead of civaddr=58 (58 is the default for a 706Mk2g) I was told to try civaddr=88. Any suggestions? Does anyone have a 706 working as a remote base that would be willing to post a snippet from their rpt.conf for me? Thanks. 73 Kyle K0KN Olathe, KS _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=BC57E1FA8.A881B