You need to change the bindport=4570 in the IAX.conf file if you want to use something other than 4569. Then forward the ports in the router. You may need to reboot your server for it to take affect. Jon VA3RQ On 10/9/2012 8:29 PM, Kevin Oleniczak wrote:
I had already done that in the portal but it still wasn't working. As an experiment, i changed everything back to the original 4569 port and forwarded that on my router. I could then connect with the webtransceiver. However i can't leave it there and need to get it to work on an alternate port. It seems from my testing that something is hard set to port 4569 on the allstar end of things?
ideas?
thank you
On Tue, Oct 9, 2012 at 3:47 AM, Ken <ke2n@cs.com <mailto:ke2n@cs.com>> wrote:
Yes -- you need to log onto the portal and get to the server configuration tab -- there is a place there to change to port number that the registration server is talking to.
Ken
*From:*app_rpt-users-bounces@ohnosec.org <mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org <mailto:app_rpt-users-bounces@ohnosec.org>] *On Behalf Of *Kevin Oleniczak *Sent:* Tuesday, October 09, 2012 12:09 AM *To:* app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> *Subject:* [App_rpt-users] Alternate IAX port >> Registered ok but not listed?
I am unable to connect to my node from the webtransceiver and don't see it listed on the active nodes page. I use an alternate iax port because i have to.
From reading other posts... it seems I may need an admin to change my iax port from 4569 to what I now want to use which is 4570? thoughts?
My registration is still showing 4569 and am forwarding 4570 on my router to my ACID box.
cruiser*CLI> iax2 show registry
Host dnsmgr Username Perceived Refresh State
<myip>:4569 N 28970 <myip>:4569 60 Registered
I'm not seeing my node show up and believe this is the cause. In my iax.conf I have bindport set 4570 and also in server config under network I set port 4570 on the portal.
looking at rpt_extnodes i see my node listed with the correct port...
28970=radio@<myip>:4570/28970,<myip>
[general]
bindaddr=0.0.0.0
bindport=4570
....
register=28970:<mypasswd>@register.allstarlink.org <http://register.allstarlink.org>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users