So, only a very short use period... I'm currently running an RTCM at a remote repeater side, it's in full duplex mode and acts as a full node to my allstar (acid) server at my house. I'm using a cradlepoint CBR400 router with a usb 4G FOB plugged into it and the ethernet port plugged into the RTCM. It's actually amazing at how well this is working! I'll let you all know as I get more time under my belt and I wait for my actual inet connection there. Alan -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Pawlowski, Adam Sent: Monday, June 04, 2012 9:37 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Thinking Out Loud This is one of the things that I was curious about with this device, and I'm glad to see that it works over the "4G" networks without major issues given the potential latency of those things. Our club maintains a couple of disparate repeaters and I'm not sure that a RF link between the two is needed for any particular purpose. Our UHF coverage is fairly abysmal so I was trying to suss out the merits of running a distributed repeater with lower power nodes hosted by members within our designated coverage area. That may be dangerous however. Given the (as far as I know) inability to run multiple URI's on a machine which may reboot (without re-assigning device IDs again) and that half our group seems to not trust anything that looks like a computer, the RTCM may work for them. Adam / KC2YQF _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users