Hi Bobby, Should be like your first example. The Goesinta to the Goesouta, and the Goesouta to the Goesinta. Might have a problem if it is looking for CTCSS, I would program the controller in Carrier Squelch (COR Only) and same with the LOX and Beagle. Monty On Wed, Jul 18, 2012 at 6:36 AM, Bobby Lacey <kf4gta@amsat.org> wrote:
Hi,
I just received my lox and beagle board a few weeks ago and I'm trying to interface it with the remote base port on our CAT 1000. I'm interfacing the LOX DB9 with the CAT 1000 DB9, but I'm not sure if I have the pinout done correctly or not.
Should the pinout be:
LOX <> CAT 1000
GND <> GND CTCSS <> CTCSS PTT <> COR AUDIO OUT <> AUDIO IN AUDIO IN <> AUDIO OUT COR <> PTT
or should the pinout be 1:1, ie:
GND <> GND CTCSS <> CTCSS PTT <> PTT AUDIO OUT <> AUDIO OUT AUDIO IN <> AUDIO IN COR <> COR
To interface the two boards, I'm using a DB9 to RJ45 on both ends and a straight through cat5 to connect the two.
Thanks for any help!
73 Bobby KF4GTA
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users