...Okay, here's some additional feedback. I've been monitoring the system for the last hour and a half, and the IDer isn't working any more, at all, for this simplex node. It ID'ed properly about 3 times. This is with duplex=1 and nounkeyct removed from the config. All telemetry is still present on the 10M simplex and it otherwise appears properly functional. Also, note that this same box is controlling a second node--a full duplex 2m repeater. Everything about the 2m side is working great--no problems with the IDer, etc. And, both of these nodes (the 2m & 10m) are linked together. This box also has chan_echolink enabled on it. Thanks for any ideas! 73, David kb4fxc On Fri, 25 Sep 2009, David McGough wrote:
Hummm...Well, I thought my 10m simplex FM node problem was resolved. But, setting nounkeyct=1 stopped the IDer proper operation, too. In fact, I don't even see the Playing 'xxxx' messages for the node on the console....To verify for certain, I removed the nounkeyct statement and left duplex=1. The IDer again works fine. But, the other undesired telemetry is back too, of course.
73, David kb4fxc
On Fri, 25 Sep 2009, David McGough wrote:
On Thu, 24 Sep 2009, Stephen Rodgers wrote:
<snip>
Search for up nounkeyct= on http://app-rpt.qrvc.com
Steve WA6ZFT
BINGO!!! PERFECT!!!
Thank you! ....BTW, the 10M FM radio is an old GE Rangr running 100W from an antenna up about 80ft. It has been fantastic during some of the sporadic-E openings this summer....A 6m 100W Rangr will be available shortly, too.
73, David kb4fxc
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users