I have three nodes and they are all static. I used the on screen menus and had no issues. My nodes are all Ethernet not wifi. Make sure if you select a static address that you select a compatible gateway IE 192.168.1.250 then your gateway might be 192.168.1.1 and it has worked for me..... Are you using WIFI or Ethernet yourself? Have you tried to reboot after to see if it takes effect after? What does the onscreen IPaddress show after the reboot.? On Mon, Jul 29, 2019 at 9:26 AM Len Griffin <lengriff@optimum.net> wrote:
I am trying to setup a system by just following the Beginners Guide and using ASL_MEMU. I want to have a static IP, and followed the instructions in the menu entering the data and then saving it. The system remains in DHCP mode every time. When I look at the /etc/network/interfaces file, there are no entries made. When I look for information on setting a linux static IP, it shows entering data in this file. Has anyone had success following the ASL-MENU? _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Darrell Black (517) 917-2226 GigaHacker@gmail.com http://www.linkedin.com/in/darrellblack 73 de W8DSB "In God we trust, all others we monitor" GMRS WRDE739