All, I am trying to add echolink to my ASL install (Dial). I read the ASL FAQ's and added the echolink.conf. I also made sure the ports are open as well. Is there anything else I need to do besides adding echolink.conf in the /etc/asterisk directory? Is there anything else I need to do? [el0] confmode=no call=K4KSA-L ; Change this! pwd=***** ; Change this! name=Steve Siesel ; Change this to your real name! qth=Seminole, Florida ; Change this to your actual QTH! email=steve@siesel.net ; Change this! maxstns=20 rtcptimeout=10 node=950077 ; Change this! recfile=/tmp/recorded.gsm astnode=46031 ; Change this to your active Allstar node number! context=radio-secure server1=server1.echolink.org server2=server2.echolink.org server3=server3.echolink.org freq=145.000 ; Freq in MHz tone=0 ; CTCSS Tone (0 for none) lat=27.863859 ; Latitude in decimal degrees lon=--82.833252 ; Longitude in decimal degrees power=0 ; 0=0W, 1=1W, 2=4W, 3=9W, 4=16W, 5=25W, 6=36W, 7=49W, 8=64W, 9=81W (Power in Watts) height=0 ; 0=10' ,1=20',2=40',3=80' ,4=160' ,5=320' ,6=640' ,7=1280',8=2560',9=5120' (AMSL in Feet) gain=0 ; Gain in db (0-9) dir=0 ; 0=omni, 1=45deg, 2=90deg, 3=135deg, 4=180deg, 5=225deg, 6=270deg, 7=315deg, 8=360deg (Direction)