Mark Almost all CPU's are 64 bits these days - not sure what you are getting at exactly. the question is: did you install the 32 bit OS (standard ACID install from scratch) or did you install your own OS using the 64 bit version? I think - officially - asterisk is only for the 32 bit OS (regardless of the CPU you have) although I know some people have it running on the 64 bit OS (including me, once upon a time). The 32 bit OS will run fine on a x86-64 cpu (so-called Intel 64 architecture). 73 Ken -----Original Message----- From: Mark Johnston <markjohnston73@gmail.com> To: K&R Yoksh <yokshs@gmail.com> Cc: app_rpt-users <app_rpt-users@ohnosec.org> Sent: Tue, Mar 26, 2013 1:27 pm Subject: Re: [App_rpt-users] Simpleusb Hi Kyle, Now it is stuck transmitting and still no/delayed response to the commands... I did hear it announce the time right before it timed out. 2 min I got it to connect to a node but the transmitter stays keyed and audio dropped out after a few seconds, could these issues be with the 64 bit cpu I have? I read about asterisk not getting along with it. Seems hard to find a small 32 bit system I prefer the micro size for space and power efficiency. Thanks for getting me this far... On Mar 26, 2013 5:36 AM, "K&R Yoksh" <yokshs@gmail.com> wrote: Hi Mark, If using simpleusb, make sure the file usbradio.conf doesn't exist in /etc/asterisk. You should have simpleusb.conf instead. Same syntax, etc. App_rpt really doesn't like it if both of usbradio.conf and simpleusb.conf exist, and will do crazy things if they are both found. 73 Kyle Yoksh K0KN Olathe, KS Allstar 2210-2219 _______________________________________________ pp_rpt-users mailing list pp_rpt-users@ohnosec.org ttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users