Thanks Chuck this is the information I was looking for now my next question is will this work with ipv6 I have two public ips dedicated to my vps one is a Ipv6 another is an ipv4 then i have a whole bunch of internal ips for between server transferring that i can use. The internal ips do not charge me bandwidth but the external ips do I get the fact that these will have to be external but my main question of the day is if the ipv6 will work.. If not i will have to request another public ip for my server.. By the way for all the other conversations about routing not sure what my host provider uses for their routing I would assume cisco but that's going out on the limb quite abit by they way everything server side has a public ip to it. Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com Phone: 618-553-0806 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com On Wed, Jul 29, 2015 at 11:41 PM, Chuck Henderson < rpt2@chuck.midlandsnetworking.com> wrote:
I have not tried any of this and do not know if it will work, but I think it will.
If your server has real IP addresses, not NATed in a firewall router, then you can create different echolink stanzas within echolink.conf and in each one put a different IP address. If you are NATed then you will have to know how to do policy routing in your professional router, like a Cisco router or maybe a routerboard.
The default if it is not configured is ipaddr=0.0.0.0
But you would make it [el0] ipaddr=8.9.10.11 all the other commands
[el1] ipaddr=8.9.10.12 all the other commands
[el2] ipaddr=8.9.10.13 all the other commands
There are a couple of people on here that know if I have this correct or not, but I don't know. Let us know if this works, if you feel like experimenting. Chuck WB9UUS
On Wed, Jul 29, 2015 at 10:16 PM, David McGough <kb4fxc@inttek.net> wrote:
Hi Loren,
I theory this would work, using one public address per Echolink instance. In the server world this type of setup is basically known as multi-homing.
However, I don't think the AllStar Echolink driver was written where the developer expected anyone to attempt to perform multi-homing. So, assuming this is true (i.e.: Echolink driver not multi-home aware), the situation is probably much more complicated....I won't delve into the gory technical details of what's needed for multi-homing, but, very simplistically speaking, the application must "remember" what IP address an inbound request came from and then answer back using that same source address.
Minimally, I expect some significant NAT (network address translation) trickery with a Linux firewall will be required to pull this off. I'm working feverishly on other aspects of this project right now, but, I'll put this on my list of things to look at, if no one else beats me to it.
And, I agree, this would be useful capability. I've got a couple repeaters right now running on the same control PC and separate echolink connectivity to each would be useful.
73, David KB4FXC
On Wed, 29 Jul 2015, Loren Tedford wrote:
Hi again its loren was curious on how to setup multiple echolink configurations with the rpt.conf and echolink.conf
On the server side I can get as many ips as needed however my issue is how can i get these services to work together..
I have enough bandwidth and grunt power just need some advice on how to set it up properly.
Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com Phone: 618-553-0806 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.