This issue has been resolved with the help of M0HOY. The fixing step was changing a home router so the Port Forwarding for 5679 was listed as UDP instead of BOTH (udp & ip). I don't understand why this worked, but I am happy. ...STeve On 11/19/2016 1:02 PM, Steve Mahler wrote:
Stephen:
Wow, changing from BOTH to UDP made it work. Crazy and doesn't bode well for the ASUS home router software! THANK-YOU for your assistance.
...STeve
On 11/19/2016 12:31 PM, Stephen Curtis wrote:
Ha Ha,
No if they are on different public IP addresses none of what I have said applies! :)
What I would suggest is that you set your 4569 ports to UDP not not both.
when you are in the CLI> do an iax2 show registry
Just to check they are both registered correctly with allstar.
Steve :)
On 19 Nov 2016, at 18:25, Steve Mahler <kizzy@lusfiber.net <mailto:kizzy@lusfiber.net>> wrote:
Stephen:
Nuts, I guess I should have mentioned that the two servers (each with one node) are on two different public IP addresses. So, does your suggestion still apply?
...STeve
On 11/19/2016 12:07 PM, Stephen Curtis wrote:
Ok what you need to do is change the bind port for your second node to 4568 because they can’t both be on the same port. You will need to add this as a UDP port in your router and also change from 4569 to 4568 on the allstarlink.org <http://allstarlink.org/> website under network settings.
node 42316
It is at the top of the config file:
iax.conf
bindport=4568
Then in the rpt.conf for each node you will need:
rpt.conf for 42315 ...
42315 = radio@127.0.0.1:4569/42315,NONE
42316 = radio@ipaddress:4568/42316,NONE
rpt.conf for 42316 ...
42316 = radio@127.0.0.1:4568/42316,NONE
42315 = radio@ipaddress:4569/42315,NONE
Cheers
Steve
On 19 Nov 2016, at 17:42, Steve Mahler <kizzy@lusfiber.net <mailto:kizzy@lusfiber.net>> wrote:
Stephen:
Thanks for the reply. Each node number is on its own server.
On each server ...
rpt.conf for 42315 ...
42315 = radio@127.0.0.1:4569/42315,NONE
rpt.conf for 42316 ...
42316 = radio@127.0.0.1:4569/42316,NONE
iax.conf for each node (on separate servers) have the registration line
in 42315 ... register = 42315:000000@register.allstarlink.org (pw changed)
in 42316 ... register = 42316:111111@register.allstarlink.org (pw changed)
The FAQ points to checking the registration in the AllStar DB. Apparently a "forcing" of port 4569 is necessary in some cases. That is what I am trying to run down.
Thanks again,
...STeve
On 11/19/2016 10:45 AM, Stephen Curtis wrote:
Sorry, forgot to check if both nodes are on the same machine?
Cheers
Steve M0HOY
On 19 Nov 2016, at 16:15, Steve Mahler <kizzy@lusfiber.net <mailto:kizzy@lusfiber.net>> wrote:
Morning! I have two nodes (42315 and 42316). Both nodes can connect outbound to other servers).
1) Node 42315 can connect outbound to 42316.
2) Node 42316 can NOT connect outbound to 42315.
3) I've checked the 42315 router ... ASUS router ... portforwarding shown below.
4) Looking for someone to confirm that 42315 is properly registered in the DB.
...STeve - KF5VH
Service Name Port Range <javascript:void(0);> Local IP <javascript:void(0);> Local Port <javascript:void(0);> Protocol
ALLSTAR-IAX 4569 192.168.1.199 4569 BOTH ECHOLINK-5198 5198 192.168.1.199 5198 BOTH ECHOLINK-5199 5199 192.168.1.199 5199 BOTH ALLSTAR-API 5038 192.168.1.199 5038 BOTH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.