Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4

10 Sep 2014

      Thanks Bob. I dont think that it has to do with something impossible to do.. In fact I have been searching the archives about problem like that.. And there was some answer about some patch to dahdi zaptel.. or such.. I am at work, dont remember.. 
If it would be installed at least up to a point. I would be able to do it.. 
I just dont know how to tell the compiler not to compile that part and go on..

From: kk6ecm@gmail.com
Date: Wed, 10 Sep 2014 09:15:13 -0700
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4

Couple of thoughts. I've not been able to load using ssh.  Last time I attempted this zaptel did not load properly, but it seems I didn't get an error until after the reboot. It seems to me (check the ACID scripts), that ACID disables ssh during the load. When I have loaded CentOS 5.10 (as previously mentioned), I then used some of the ACID scripts to load asterisk, etc, I always had to us a monitor and keyboard on the server to be fully successful. But hey... that could just be my fumbling around.
As for your stated concern. I could be because no one knows the answer. Hard to believe, I know, but it seems to happen occasionally on this list :~}

Thanks,Bobkk6ecm
Sent from iPad

On Sep 10, 2014, at 8:30 AM, pete M <petem001@hotmail.com> wrote:

OK, 
did I asked a question that CAN’T be answered? Or did I asked the wrong way? 

If 
I did I am sorry.. And I gave my apology to every one I could have offended.. 

But 
is it possible to at least have a small word from all those guru here if it can 
be done, and which way should I go? dont need to have someone holding my hand.. 
Just need to have a small Idea what to do..

Like 
just point me the pathway.. I will try to do it on my own..

Thanks

On 
Sep 9, 2014, at 11:13 AM, pete M <petem001@hotmail.com> 
wrote:

  I cant use the acid.iso cause the computer is in a remote place ( rented 
  server) and they dont supply special OS installation. I can have fedore ubuntu 
  centos on many flavor (x86 or 64 bit) and many revision... The problem is not 
  the loading od the cd are other things like that..

  I am sure that the kernel is too new and there is a part of zaptel that 
  need a depricated fonction If I am not crazy..

  From: kk6ecm 
  Sent: Tuesday, September 09, 2014 1:40 PM
  To: APP RPT 
  Subject: Re: [App_rpt-users] Centos 5 with kernel 
  2.6.32-042stab093.4

  I use this when ACID will not load, usually due to issues with BIOS and 
  network drivers. I was assuming you were not able to get ACID to load on you 
  computer. If your running phase2.sh was a second attempt after trying to load 
  ACID, you may need to check that all the files are there because the load 
  deletes some files. In short, if this occurred during an attempt to load the 
  ACID download, I'd just try it again. 

Thanks, 
  Bob
  kk6ecm

  Sent from iPad 

On Sep 9, 2014, at 8:27 AM, pete M <petem001@hotmail.com> 
  wrote:

    Ok will try that..

    thanks!

    From: Bob 
    Sent: Tuesday, September 09, 2014 10:55 AM
    To: 'APP RPT' 
    Subject: Re: [App_rpt-users] Centos 5 with kernel 
    2.6.32-042stab093.4

    I’ve done this 
    several times without issue. Here are the steps I 
    used.

    Load CentOS 5.10 
    downloaded from CentOS website
    No features, tools only, 
    no desktop (competes with Asterisk)
    Set ssh 
    /etc/ssh/sshd_config
    Run "setup" at comand 
    line and disable firewall
    vi 
    /etc/rc.d/acidrepo
       http://dl.allstarlink.org
    Execute portion of 
    ks.cfg, each line at a time
    cp /etc/rc.d/rc.local 
    /etc/rc.d/rc.local.orig
    cat <<EOF 
    >>/etc/rc.d/rc.local

    cd /etc/rc.d; rm -f 
    phase1.sh; wget -q http://dl.allstarlink.org/installcd/phase1.sh 

    chmod 755 
    /etc/rc.d/phase1.sh

    /etc/rc.d/phase1.sh
    Auto reboot after 
    phase1.sh executed
    phase2.sh runs 
    automatically to completion

    Bob
    kk6ecm

    From: app_rpt-users-bounces@ohnosec.org 
    [mailto:app_rpt-users-bounces@ohnosec.org] 
    On Behalf Of pete 
    M
Sent: Tuesday, September 
    09, 2014 7:00 AM
To: APP 
    RPT
Subject: 
    [App_rpt-users] Centos 5 with kernel 
    2.6.32-042stab093.4

    Need help to 
    install an allstarlink node that wont have any radio on it in a data center 
    to be my central reflector for my french network of repeater around 
    Quebec Canada..

    I did try to run 
    phase2.sh from /etc/rc.d/ but this fail when 
    compiling.

    here is the out 
    put from the script

    sh 
    phase2.sh

    ****** Phase 2 
    post install ******

    Getting asterisk 
    install script from http://dl.allstarlink.org../.

    Getting 
    files.tar.gz from http://dl.allstarlink.org../.

    ****** Asterisk 
    Installation ******

    /etc/rc.d/astinstall.sh: 
    line 11: ntpdate: command not found

    Unpacking 
    files.tar.gz...

    Compiling 
    Zaptel...

    checking for 
    gcc... gcc

    checking for C 
    compiler default output file name... 
a.out

    checking whether 
    the C compiler works... yes

    checking whether 
    we are cross compiling... no

    checking for 
    suffix of executables...

    checking for 
    suffix of object files... o

    checking whether 
    we are using the GNU C compiler... yes

    checking whether 
    gcc accepts -g... yes

    checking for gcc 
    option to accept ISO C89... none needed

    checking how to 
    run the C preprocessor... gcc -E

    checking for a 
    BSD-compatible install... /usr/bin/install 
    -c

    checking whether 
    ln -s works... yes

    checking for GNU 
    make... make

    checking for 
    grep... /bin/grep

    checking for 
    sh... /bin/sh

    checking for 
    ln... /bin/ln

    checking for 
    wget... /usr/bin/wget

    checking for 
    grep that handles long lines and -e... (cached) 
    /bin/grep

    checking for 
    egrep... /bin/grep -E

    checking for 
    ANSI C header files... yes

    checking for 
    sys/types.h... yes

    checking for 
    sys/stat.h... yes

    checking for 
    stdlib.h... yes

    checking for 
    string.h... yes

    checking for 
    memory.h... yes

    checking for 
    strings.h... yes

    checking for 
    inttypes.h... yes

    checking for 
    stdint.h... yes

    checking for 
    unistd.h... yes

    checking for 
    initscr in -lcurses... no

    checking for 
    initscr in -lncurses... no

    checking for 
    newtBell in -lnewt... no

    checking for 
    usb_init in -lusb... no

    configure: 
    creating ./config.status

    config.status: 
    creating build_tools/menuselect-deps

    config.status: 
    creating makeopts

    config.status: 
    creating build_tools/make_firmware_object

    configure: *** 
    Zaptel build successfully configured ***

    make[1]: 
    Entering directory 
    `/usr/src/astsrc/zaptel/menuselect'

    checking build 
    system type... i686-pc-linux-gnu

    checking host 
    system type... i686-pc-linux-gnu

    checking for 
    gcc... gcc

    checking for C 
    compiler default output file name... 
a.out

    checking whether 
    the C compiler works... yes

    checking whether 
    we are cross compiling... no

    checking for 
    suffix of executables...

    checking for 
    suffix of object files... o

    checking whether 
    we are using the GNU C compiler... yes

    checking whether 
    gcc accepts -g... yes

    checking for gcc 
    option to accept ANSI C... none needed

    checking for GNU 
    make... make

    checking for 
    asprintf... yes

    checking for 
    getloadavg... yes

    checking for 
    setenv... yes

    checking for 
    strcasestr... yes

    checking for 
    strndup... yes

    checking for 
    strnlen... yes

    checking for 
    strsep... yes

    checking for 
    strtoq... yes

    checking for 
    unsetenv... yes

    checking for 
    vasprintf... yes

    checking how to 
    run the C preprocessor... gcc -E

    checking for 
    egrep... grep -E

    checking for 
    ANSI C header files... yes

    checking for 
    sys/types.h... yes

    checking for 
    sys/stat.h... yes

    checking for 
    stdlib.h... yes

    checking for 
    string.h... yes

    checking for 
    memory.h... yes

    checking for 
    strings.h... yes

    checking for 
    inttypes.h... yes

    checking for 
    stdint.h... yes

    checking for 
    unistd.h... yes

    checking for 
    initscr in -lcurses... no

    checking for 
    initscr in -lncurses... no

    checking for 
    pkg-config... No

    configure: 
    creating ./config.status

    config.status: 
    creating makeopts

    config.status: 
    creating autoconfig.h

    configure: 
    configuring in mxml

    configure: 
    running /bin/sh './configure' --prefix=/usr/local  'CC=' 'LD=' 'AR=' 
    'CFLAGS=' --cache-file=/dev/null 
    --srcdir=.

    checking for 
    gcc... gcc

    checking for C 
    compiler default output file name... 
a.out

    checking whether 
    the C compiler works... yes

    checking whether 
    we are cross compiling... no

    checking for 
    suffix of executables...

    checking for 
    suffix of object files... o

    checking whether 
    we are using the GNU C compiler... yes

    checking whether 
    gcc accepts -g... yes

    checking for gcc 
    option to accept ANSI C... none needed

    checking for 
    g++... no

    checking for 
    c++... no

    checking for 
    gpp... no

    checking for 
    aCC... no

    checking for 
    CC... no

    checking for 
    cxx... no

    checking for 
    cc++... no

    checking for 
    cl... no

    checking for 
    FCC... no

    checking for 
    KCC... no

    checking for 
    RCC... no

    checking for 
    xlC_r... no

    checking for 
    xlC... no

    checking whether 
    we are using the GNU C++ compiler... no

    checking whether 
    g++ accepts -g... no

    checking for a 
    BSD-compatible install... /usr/bin/install 
    -c

    checking for 
    ranlib... ranlib

    checking for 
    ar... /usr/bin/ar

    checking for 
    cp... /bin/cp

    checking for 
    ln... /bin/ln

    checking for 
    mkdir... /bin/mkdir

    checking for 
    nroff... /usr/bin/nroff

    checking for 
    rm... /bin/rm

    checking for 
    strdup... yes

    checking for 
    vsnprintf... yes

    configure: 
    creating ./config.status

    config.status: 
    creating Makefile

    config.status: 
    creating mxml.list

    config.status: 
    creating mxml.pc

    config.status: 
    creating config.h

    configure: 
    Menuselect build configuration successfully 
    completed

    make[1]: Leaving 
    directory 
    `/usr/src/astsrc/zaptel/menuselect'

    make[1]: 
    Entering directory 
    `/usr/src/astsrc/zaptel/menuselect'

    make[2]: 
    Entering directory 
    `/usr/src/astsrc/zaptel/menuselect'

    gcc -g -c 
    -D_GNU_SOURCE -Wall    -c -o menuselect.o 
    menuselect.c

    gcc -g -c 
    -D_GNU_SOURCE -Wall    -c -o strcompat.o 
    strcompat.c

    gcc -g -c 
    -D_GNU_SOURCE -Wall    -c -o menuselect_stub.o 
    menuselect_stub.c

    make[3]: 
    Entering directory 
    `/usr/src/astsrc/zaptel/menuselect/mxml'

    gcc -O 
    -Wall   -c mxml-attr.c

    gcc -O 
    -Wall   -c mxml-entity.c

    gcc -O 
    -Wall   -c mxml-file.c

    gcc -O 
    -Wall   -c mxml-index.c

    gcc -O 
    -Wall   -c mxml-node.c

    gcc -O 
    -Wall   -c mxml-search.c

    gcc -O 
    -Wall   -c mxml-set.c

    gcc -O 
    -Wall   -c mxml-private.c

    gcc -O 
    -Wall   -c mxml-string.c

    /bin/rm -f 
    libmxml.a

    /usr/bin/ar crvs 
    libmxml.a mxml-attr.o mxml-entity.o mxml-file.o mxml-index.o mxml-node.o 
    mxml-search.o mxml-set.o mxml-private.o 
    mxml-string.o

    a - 
    mxml-attr.o

    a - 
    mxml-entity.o

    a - 
    mxml-file.o

    a - 
    mxml-index.o

    a - 
    mxml-node.o

    a - 
    mxml-search.o

    a - 
    mxml-set.o

    a - 
    mxml-private.o

    a - 
    mxml-string.o

    ranlib 
    libmxml.a

    make[3]: Leaving 
    directory 
    `/usr/src/astsrc/zaptel/menuselect/mxml'

    gcc -o 
    menuselect menuselect.o strcompat.o menuselect_stub.o mxml/libmxml.a 
    mxml/libmxml.a

    make[2]: Leaving 
    directory 
    `/usr/src/astsrc/zaptel/menuselect'

    make[1]: Leaving 
    directory 
    `/usr/src/astsrc/zaptel/menuselect'

    Generating input 
    for menuselect ...

    ***********************************************************

      The 
    existing menuselect.makeopts file did not 
    specify

      that 
    'zttool' should not be included.  However, either 
    some

    dependencies for this module were not found or 
    a

      conflict 
    exists.

      Either 
    run 'make menuselect' or remove the 
    existing

    menuselect.makeopts file to resolve this 
    issue.

    ***********************************************************

    make: *** 
    [menuselect.makeopts] Error 255

    Failure: Unable 
    to compile Zaptel 2

    Fatal error: 
    Unable to install Asterisk!

    [root@node 
    rc.d]#

    I dont know 
    where to go from there..

    Anyone care to 
    help a bit?

    _______________________________________________
App_rpt-users mailing 
    list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To 
    unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
    and scroll down to the bottom of the page. Enter your email address and 
    press the "Unsubscribe or edit options button"
You do not need a password 
    to unsubscribe, you can do it via email confirmation. If you have trouble 
    unsubscribing, please send a message to the list detailing the 
    problem.

  _______________________________________________
App_rpt-users mailing 
  list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To 
  unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
  and scroll down to the bottom of the page. Enter your email address and press 
  the "Unsubscribe or edit options button"
You do not need a password to 
  unsubscribe, you can do it via email confirmation. If you have trouble 
  unsubscribing, please send a message to the list detailing the 
  problem.

_______________________________________________
App_rpt-users mailing 
list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To 
unsubscribe from this list please visit 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the 
bottom of the page. Enter your email address and press the "Unsubscribe or edit 
options button"
You do not need a password to unsubscribe, you can do it via 
email confirmation. If you have trouble unsubscribing, please send a message to 
the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.