Corrected... the IPs and /nodes were not correct in the previous example... 40000 = radio@127.0.0.1/40000,NONE 40001 = radio@192.168.1.100:4568/40001,NONE <<<< IP and port of other local server On the other server it would be just reversed with the other nodes port. 4569 is default but shown here for clarity. 40001 = radio@127.0.0.1/40001,NONE 40000 = radio@192.168.1.101:4569/40000,NONE <<<< IP and port of other local server 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Mon, 9 Feb 2015 12:11:04 -0500 From: mike.lussier@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] 2 nodes setup to auto connect don't seem to work Good afternoon all, I have two nodes on my internal network. both on the same subnet. for the past 16 hours if I look at either node that show state as "Connecting" and not connected . Any thoughts ? I tried it once from one node running a script and before I went to bed last night I tried it from the other side. Mike AE4ML -- "We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.