I keyed up my test radio which transmitted to the node radio and gave it silence with the right PL tone set, and then I waited. I set a 206.5 tone because I wanted to make sure the baofeng didn't filter it out with a high pass filter On Mon, Mar 2, 2015 at 8:25 AM, Steve Agee <n5zua@earthlink.net> wrote:
The "meas=25995" indicates the node is seeing discriminator audio, although just a tad bit low in level. So, it is making it in OK. Can you elaborate on what conditions you have established for the menu item 4 test?
N5ZUA
On 3/2/2015 7:25 AM, Skyler F wrote:
First I am using the Baofeng radio for the second node, and using speaker audio, which I understand is not the best, but I am hoping I can at least get it to work.
Second, I hit menu 2 *Auto detect RX noise level:*
*Tries=6, setting=563, meas=25995, sqnoise=168.*
Now I hit menu 4 Auto detect CTCSS with carrier and CTCSS
And this is where I have issuees *Setting = 8.00 meas=0.00* *RX CTCSS GAIN ADJUST FAILED*
I also tried it with speaker audio instead of flat, but I still couldn't get it to work. I remember at some point while listening on the web transceiver a tiny bit of audio came through but nothing really is getting through since.
Thanks, Skyler
On Sun, Mar 1, 2015 at 10:59 PM, Steve Agee <n5zua@earthlink.net> wrote:
From the CLI, make sure you have correct CM108 fob selected (if more than one is hooked up) and run CLI> "radio tune rxnoise" without the quotation marks, with the receiver sending discriminator audio to the fob, and you should be seeing around 28000 as the level coming in. Call me if you need more help. You already have my number.
N5ZUA
On 3/1/2015 9:23 PM, Skyler F wrote:
I made the modification to the startech CM108 sound fob. This is for a second node on the same machine. Everything should be working, the node is transmitting with audio and PTT is activating properly.
The receive should be working too, I plugged it in to my macbook and was able to hear the white noise just fine and I could hear my voice when I keyed up.
I also had Jeremy W0JRL help with everything on the software, and we tried about everything from Flat audio to speaker audio to COR to CTCSS but still no receive audio coming through the network, it isn't detecting anything when I am transmitting from my node radio to the node.
I was on the phone with him for almost two hours trying anything we could think of, I did anything hardware, and he modified anything software, but we still got no audio through the network. We even turned off the squelch and there was a dead carrier through the network.
Is there something wrong compatibility wise with this fob? I did everything in the instructions and I got it from here http://www.newegg.com/Product/Product.aspx?Item=N82E16829128002.
I used this instruction manual http://www.repeater-builder.com/projects/fob/USB-Fob-Construction.pdf
If this is a compatibility issue, it is sure a weird one because the Txaudio worked fine.
Is there a way to tell if any audio at all is coming in to AllStar?
What can I try next to troubleshoot?
73 Skyler KDØWHB
-- Skyler Fennell amsatnet.info <http://amsatnet.info> KDØWHB electricity440@gmail.com <mailto:electricity440@gmail.com>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com