That's the class of machine I usually run Asterisk, AllStar, IRLP, and other similar stuff on. I pick them up cheap at the local surplus stores, they are lease returns from places that were running Windows XP on them. I have a handful of them in daily production use, mostly running the PBX in a Flash distribution of Asterisk. You only need a Gig of ram (maybe less) and a 40 gig hard drive is plenty. If it's going on a hill or other remote place, check the fans and hard drive carefully, and look for swollen capacitors on the mother board. On Mar 2, 2013, at 1:17 PM, pete M <petem001@hotmail.com> wrote:
Ok I think I have a 2.6ghz penthium 4 system around... I hope this will run ok on it,
From: Don Hackler Sent: Saturday, March 02, 2013 2:36 PM To: Pierre Martel Subject: Re: [App_rpt-users] Really need some advice here..
That's way more motherboard than you need. You might try a simpler motherboard to test. Pretty much anything with a single Pentium 4 or better should work fine.
Otherwise there are a bunch of APIC flags you can turn off at kernel boot time, but that gets a bit trickier.
I also recommend running memtest386+ on any new system for a day or so to make sure you don't have memory or hardware problems,
On Mar 2, 2013, at 10:51 AM, "Pierre Martel" <petem001@hotmail.com> wrote:
Ok I finnaly got the ok to switch everything from the rc-210 to app_rpt based controler. I eveb got a board with a dual amd cpu 2 gig ram ect.. Now Acid wont install no matter what I do. If I clear anything about APIC in the Bios that make a kernel panic at boot of the install dsik it will fail giving all sort of crash information for hours.. I got version 6.3 centos for x86_64 to run, but If I try to start phase1.sh so that the install script from acid try to load, it will tell me bad version of centos and stop.. Anyone can point me in a direction where to go from here? I am totally lost, but fast to catch up and learn. Pierre VE2PF Dude??? some help please?? ;-) _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users