On 01/22/2014 11:13 AM, Tim Sawyer wrote:
Good point. And the telemetry stanza comments say:
; Telemetry entries can be shared across all repeaters, or defined for each repeater.
So I’d say you CANNOT have separate morse stanzas.
Well... kinda... Technically, yes - (from my experience) only one morse stanza can be defined, but different ID strings can be entered for each node. What's funny is, (it's really comical) my node 29657 (simplex node) is the *3rd* node defined in rpt.conf. If I key up the simplex node *first*, upon asterisk re-start, then the morse stanza for 29657 is used through out rpt.conf. Meaning [morse29655] speed=20 ; Approximate speed in WPM frequency=500 ; Morse Telemetry Frequency amplitude=2048 ; Morse Telemetry Amplitude idfrequency=1000 ; Morse ID Frequency idamplitude=2048 ; Morse ID Amplitude [morse29657] speed=20 ; Approximate speed in WPM frequency=1000 ; Morse Telemetry Frequency amplitude=2048 ; Morse Telemetry Amplitude idfrequency=500 ; Morse ID Frequency idamplitude=1026 ; Morse ID Amplitude if I key up 657 first, then the ID frequency is low and subdued, and the telmetry CW strings are ear-piercing . If I key up 655 first, the ID frequency is high and piercing, and the telemtry CW strings are low and subdued. It makes a difference. -Geoff/W5OMR