Bob, Here is my entire file. The last 5 lines set the static address. You also have to set the gateway and /etc/resolv.conf for the nameserver. [root@WA3DSP_Allstar network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none HWADDR=00:03:2d:05:fc:b0 ONBOOT=yes DHCP_HOSTNAME=WA3DSP_Allstar IPADDR=192.168.0.124 NETMASK=255.255.255.0 GATEWAY=192.168.0.9 TYPE=Ethernet See - https://gist.github.com/fernandoaleman/2172388 73 Doug WA3DSP http://www.crompton.com/hamradio From: kk6ecm@gmail.com To: app_rpt-users@ohnosec.org Date: Fri, 4 Apr 2014 13:18:52 -0700 Subject: [App_rpt-users] Moving ACID from dynamic to static IP I can use some help... I want to move an Allstar ACID server from dynamic to static IP without a complete reinstall... It seemed to use a script during install (I typed “N” at the time), which I am attempting to locate, or the config file with an example. I’ve been looking through /etc/sysconfig/networkscripts and found ifcfg-eth0, which says, DEVICE=eth0 BOOTPROTO=dhcp DHCPCLASS= HWADDR=54:04:A6:EB:BF:90 ONBOOT=yes DHCP_HOSTNAME=<server name> Can I modify this to: DEVICE=eth0 BOOTPROTO=none DHCPCLASS= HWADDR=54:04:A6:EB:BF:90 ONBOOT=yes DHCP_HOSTNAME= NETWORK=xxx.yyy.zzz.0 ;basic network address? NETMASK=255.255.255.0 IPADDR=xxx.yyy.zzz.27 ;static IP address Am I missing anything? I will be at a remote site, so want to have it correct before the move, and can’t test it at the current location. Hope this is not wishful thinking. Thanks, Bob kk6ecm _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.