You must use different ports for each computer if they are behind the same router/firewall. You can tell the allstar environment to use a different port (many use 4570), through configuring it on allstarlink.org through the sysop configuration menus. On your router, tell 4569 to go to one computer and 4570 to the other. You need to address this first. Keith On 10/15/13 6:17 PM, "Harry Romano" <hromano@earthlink.net> wrote:
Hello All,
I have 3 nodes total 2 nodes are connected with fobs to computer 1 another the 3rd node is connected with a fob on computer 2 . The 2 nodes on the first computer work great. The node on the 2nd computer will not connect to anything except the allstar node list( the fob works ). In my router (Linksys) I have the ports forwarded to the first computer but when I try and forward the ports to the 2nd computer the router says overlapping ports. The computers are set to 2 different static IP addresses. All three nodes log into the allstar web-transceiver page but the node on the 2nd computer will try and connect then it immediately disconnect. They all show up on the node list. Is there a way to make the 2 nd computer with the single node work behind my router. I also tried to DMZ the second computer but still it does not connect. I could sure use some help please.
73
Harry Romano KC4RPP
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA