I assume that you can connect to the remote node ok before attempting to control it. Ssh in to your node and start the asterisk console, ie do "asterisk -rvvv". Then press your touch tones. You should see the correct tones on the asterisk console. If that looks ok, you might check and see if you're still connected. Do a "rpt lstats node#". -- Tim :wq On Oct 31, 2011, at 4:48 PM, Lu Vencl wrote:
Nothing at all.
Sent from my iPhone, Lu Vencl
On Oct 31, 2011, at 6:17 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
So what happens when you do *4 + the remote node number? -- Tim :wq
On Oct 30, 2011, at 3:54 PM, Lu Vencl wrote:
Been having an issue over the past several days where I can no longer execute ILINK4 to remotely control some of my other nodes. If I reboot the node, it most of the time will correct the issue. The other odd notable is that the CW tone frequency seems to go back to the default frequency as well. Any thoughts on what might be happening?
Thanks Lu KA4EPS
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users