Ramesh, I don't know where the problem would be off-hand, but what I would try going back to a single node system, delete the tune file(s) and gradually add things until it either works, or you can determine the thing that breaks it. Do things one step at a time noting the results at each step. Then revert back to the prior step to see if functionallity is restored. One thing that mildly concerns me is that usbradio_tune.conf should never, ever be copied. Tuning must be done from scratch on an addtional nodes as they are added. Steve WA6ZFT Stephen Rodgers wrote:
Ramesh,
I don't know where the problem would be off-hand, but what I would try going back to a single node system, delete the tune file(s) and gradually add things until it either works, or you can determine the thing that breaks it. Do things one step at a time noting the results at each step. Then revert back to the prior step to see if functionallity is restored.
One thing that mildly concerns me is that usbradio_tune.conf should never, ever be copied. Tuning must be done from scratch on an addtional nodes as they are added.
Steve WA6ZFT
Ramesh Dhami (VA3UV) wrote:
Hi Steve and all;
I attempted adding a new node (2424) onto my existing system where I have 2182 and 2248 running.
2182 is a real node using a usbfob; 2248 is my chan_dstar node.
I followed the instructions in the ACID admin guide when adding the new node - modified the 4 files as instructed (rpt.conf, iax.conf, extensions.conf and usbradio.conf).
That all went fine - got node 2424 setup and reporting to the stats page. I was able to use CLI and connect 2182 to 2424. I then noticed that there was no audio passing from 2182 over to 2424.
I then tried issuing DTMF from 2182 and no go - CLI did not show my DTMF!
Speaking with Jon (VA3RQ) who recently setup a 2 node system, we edited the rpt.conf and usbradio.conf files such that the 2 nodes specified Radio/usb0 and Radio/usb1 respectively. Similarly, we renamed and edited the usbradio_tune_usb.conf file to reference usb0, and also renamed the file name to usbradio_tune_usb0.conf and usbradio_tune_usb1.conf respectively.
No luck - still no audio into the (original) fob. Unfortunately, I'm unable to test audio into the new fob since the mods are not complete!
Since I had saved all of the original files, I rolled back to the original 4 files (single node, 2182) and unfortunately, I have the same symptoms - no audio into the fob. In fact when I go into debug mode, I do not even see a carrier from the fob.
Audio out of the fob works fine!
Is it possible that I've messed up something else when trying to add the second node - i.e., something other than the 4 files mentioned that would have an impact on the fobs ability to sense any of the inputs?
Deaf in Toronto....
Ramesh. _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users