I find that if the tx audio settings are close to the edges of adjustment for the URI then you get Allison distorted. First I would preset the input and output audio pots on the controller for 1 v p-p if possible. Then set the tx and RX audio on the URI. If that still has distorted audio you may need to take out the audio boost or put it in, then re-cal the audio levels on the node. If all else fails, then in usbradio set txprelim=yes and re-cal the audio in the node. These steps should easily take care of this issue. Jon RQ On 4/15/2016 7:24 AM, Steve Zingman wrote:
Steve, stop asterisk
cd /usr/src svn co http://svn.ohnosec.org/svn/projects/allstar/uridiag/trunk uridiag cd uridiag make chmod +x uridiag ./uridiag
I will add it to the next rev
73, Steve N4IRS
On 04/15/2016 07:12 AM, Stephen - K1LNX wrote:
Hi guys... I've got a SimpleUSB full duplex system connected to a port on my controller (Arcom RC210) and I've noticed something weird with telemetry announcements, specifically connect/disconnect messages, and I've tried with both a URI and URI-X with the same results.
I suspect the audio may be clipping in the controller, even though the levels appear to be adjusted correctly for 3Khz deviation @ 1Khz modulation in and out, so I want to make sure the URI(s) are not the problem.
I see you can build a loopback connector (docs.allstarlink.org/drupal/node/143 <http://docs.allstarlink.org/drupal/node/143>), but what's the best way to test this? Is there a way to inject/monitor audio? I'd like to see if I can reproduce the choppy audio so I can eliminate this being something in my system and/or URI(s).
tnx Stephen K1LNX
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--- This email is free from viruses and malware because avast! Antivirus protection is active. https://www.avast.com/antivirus