It has been posted several times here, and it is on the ohnosec site, that app-rpt is based on Asterisk 1.4 and not the latest release of Asterisk(1.8). Ken -----Original Message----- From: Shane Morris <edgecomberts@gmail.com> To: Matthew Pitts <n8ohu@yahoo.com> Cc: app_rpt mailing list <app_rpt-users@ohnosec.org> Sent: Mon, Dec 3, 2012 1:07 pm Subject: Re: [App_rpt-users] Some information, from my brain... Hi Matthew, It appears that support for app_rpt was dropped in the mainline from he SVN version on onnosec, and the present version. I know what ou're thinking - I thought it too, compile up the latest sources, nd... it don't work. Working with that, I attempted to compile the ersion of Asterisk on the SVN, with the app_rpt and chan_voter odules - and ran into these issues. I could be wrong, but I am pretty certain the latest Asterisk doesn't upport app_rpt. Ergo, I did a "make menuselect" and no option xisted. That was sorely disappointing. Matthew, I hope I'm wrong...! =) Thanks! Shane. On Tue, Dec 4, 2012 at 3:44 AM, Matthew Pitts <n8ohu@yahoo.com> wrote: Shane, I will have to double check, but I could swear I saw Asterisk listed as one of he available packages for Raspian Linux on the Raspberry Pi; if that is indeed he case, I would.think it would be possible to figure out what they did and ode something that will enable the use of APP_RPT on the Pi. Matthew Pitts N8OHU Sent from my Verizon Wireless 4G LTE smartphone -------- Original Message -------- Subject: [App_rpt-users] Some information, from my brain... From: Shane Morris <edgecomberts@gmail.com> Date: Mon, 03-Dec-2012 05:03 To: app_rpt mailing list <app_rpt-users@ohnosec.org> CC: I wrote two emails today, one dealing with the subject of the use of ARM platforms for app_rpt/ chan_voter software, and one dealing with the audio capabilities of modern laptops, particularly Macbook Airs. The intent follows: -------------------------------------------- So after alot of wrangling, I've found out something: DAHDI and Zaptel support on ARM Linux kernels version 3.0 and above just doesn't happen. I personally believe this is because most ARM systems lack a PCI slot of any description, and pretty much will forever lack PCI slots (the last ARM I heard of that had PCI was the Ionynx PC from the UK, running RiSC OS - oops?). Now this doesn't give Digium an incentive to code up some support for non-existant hardware, under the pretense that app_rpt and chan_voter needs tonezone and a handful of other elements from Zaptel (or DAHDI), does it? Which means you effectively cannot, for the foreseeable future, use an ARM platform as the controller for a PMR network. That means that, for the first time in five years, I'm considering buying an x86 platform. Huh, you say, this is Shane we're talking about here, he don't do x86! Unless a certain set of conditions are met, no, I don't... Meet the Fit PC-3. You might know it, or the Fit PC-2. I admit to knowing the Fit PC-2 quite well. A nice piece of gear. What I didn't know was they updated to an AMD APU based system, and qualified the PC-3 for use with Linux Mint. Uh huh, headless Ubuntu, here I come! And this little, fanless, 17Watt total draw bad boy will run all of the usual suspects in a PMR network that you may so desire... Which is what I desire. ARM can be such a pain in the ass sometimes... This system, with 4GB of RAM, no HDD, and postage from Israel (I don't think it'll get here before Christmas, but thanks for asking), is the princely sum of $485, max, including Paypal "tax." We pay the nobles a damn stiff fee for civilisation, don't we? I have a 40GB SSD here, just about ready to go. I also have some 12VDC gear, ready for this little thing to strut its stuff. As I want it to run headless, I'll probably get it to talk SSH ("Shhhhhh!") to the outside world, but I do have a 12VDC compatible 15 inch DVI monitor, with HDMi to DVI cable. Yes, yes, it uses cold cathodes... gah, its so hard to get good help these days. I don't actually have to have the monitor on for an entire weekend, only when things hit fans in interesting, intersecting ways they're not supposed to. If that happens, and I can't log into my PMR controller, I think the network is pretty much toast by that point. I don't believe I'd need a failover, I remember reading something along the lines of underclocking will occur until such time as a heat issue can resolve itself, the thing, with SSD, has no moving parts (no pesky fans to fail!) and as long as you don't hook the power up backwards, this thing is pretty much unkillable. Dual core APU at 1.0GHz, as mentioned, 4GB RAM, 40GB SSD. Running a nice, recent revision of something that can operate in console/ SSH mode. I don't want an X server to slow me down. This thing is a PMR controller, not a Facebookin' machine. So, I've solved all my problems with ARM platforms in one fell swoop. This is good you say, I'm finally making progress. Lucky I found out with the RPi about the DAHDI/ Zaptel driver situation, and of course, the existence of the Radio Thin Client Module as well (thanks Jim! I owe you a tall, cold beer one day!). The RTCM is the basis for VoterCard, the PMR full transmit simulcast controller for Simoco radios. -------------------------------------------- For use of a laptop system with IAXRpt, one finds that most laptops audio systems are inadequate, especially in the high noise, and high tension area of a command centre. The Macbook Air is further disadvantaged by the fact it has no microphone port, simply an inbuilt microphone which is prone to picking up alot of noise, and in a command situation, broadcasting four operators voices over one channel is a recipe for failure, and yes, even danger... However after all the work I had invested into getting IAXRpt running on my MBA, I felt it appropriate to address what I see as Apples total shortcomings in the audio department. Before I go on to explain how I addressed these issues, I will elaborate - the running of the Windows application IAXRpt under Mac OS X is simple, using a version of WiNE for Mac OS X. The particular wrapper software I use is called WineBottler. However, I could not use the stock "for OS X 10.6" revision software, as it did not support audio in any way, shape or form. I actually had to download WineBottler, with 10.6 core, and replace the core with 10.7 audio enabled core. As far as I know, the 10.7 core WILL NOT run on anything less than 10.7. Of course, I don't have anything to try now, do I? So, a quick look on eBay located a USB sound card, with advertised Mac OS X capabilities - have you ever tried putting a Winmodem into a Mac G4? =P This was mine for under the $5 mark. Similarly, another quick search turned up a headset appropriate for the USB sound card with singular headphone and boom mic, as well as separate plugs for the audio paths. Compatibility was assured - but I just had to TEST it! Today I got the sound card after about a month of waiting. After inserting the USB card, I looked through the sound settings - "Generic USB Sound Device" came up, and the connection type was "USB" (versus "Built In"). After setting the appropriate settings, I took a deep breath, and started "Above the Storm" by Alpine Fault in iTunes... Success! I was listening to those strums, explained to me as being similar to those of Nightwish, through my headphone! Noise and auditory interference would now be minimised. But what about sending audio? Would the mic work too? Opening GarageBand, I quickly selected "Voice" and made a recording. My nasally voice popped out of the headphone. I was satisfied that the Mac would work. Now the real test: would WiNE (and thus, IAXRpt) work? I am unable to test sending audio, although the error tone came out loud and clear from IAXRpt. It appeared I wouldn't have to change any settings on the IAXRpt (Windows) side like I was expecting - it must be transparent to the Windows software where the audio is actually COMING from or GOING to... gotta love that old Mac reliability to just bloody well work...! -------------------------------------------- Hopefully this helps anyone in my position, and updates you all on the progress of the RPi project. It is a little unfortunate, but I have found out alot along the way - Jim, I do owe you that beer for pointing out the RTCM to me. And if you have any news concerning the status of the ARM drivers, I'm all ears... _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users ______________________________________________ pp_rpt-users mailing list pp_rpt-users@ohnosec.org ttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users