Wow, all this discussion about macro-oni is getting me hungry!! :-) :-) Jim
From: tim.sawyer@me.com Date: Tue, 30 Jul 2013 21:33:13 -0700 To: App_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] DTMF Variables
Assuming you already have the public and private nodes setup, and assuming the private node and public node are connected, on the private node add a macro like so:
[macros] 1 = *4xxxxx*329728# 2 = *4xxxxx*129728#
where xxxxx = your public node. the # is needed to complete the *4 (ie to terminate remote command) -- Tim :wq
On Jul 30, 2013, at 7:43 PM, Robert Garcia <robert@n5qm.com> wrote:
All,
Is it possible to pass a variable via DTMF to a macro? Let me explain my goal..
Private Node <-> Public Hub
I would like a user on the private node to be able to link or unlink the hub node without having to go through the *4 remote command process to do it.
In practice, I would like to use a macro like *5329728 from the Private Node and have the Public Hub connect to node 29728, is this possible?
Robert N5QM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users