Bob, AllStar Link can be configured as not only the repeater controller, but the receiver voter AND the phone patch as well; It is also possible to hook in the weather receivers, though how it all will work is something I can't specifically tell you. Matthew Pitts N8OHU
________________________________ From: Bob - AF6D <bob@af6d.com> To: app_rpt-users@ohnosec.org Sent: Wednesday, December 12, 2012 5:53 PM Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 46, Issue 20
I am completely new to Allstar and hope that you will excuse what some will think is a stupid question.
We have three repeaters on the same pair that we wish to link together in a voted simulcast configuration. I inquired about using our existing RC-210 controllers and was asked why I wanted to use a controller when Allstar can do such a great job. I am sure it can but I am curious how we get our phone patch and our weather receivers integrated, as well as RF links. As an ECOM repeater service these are important to us. Simple is of course better but like I said I am completely green.
I read that there is a piggy back device that allows the repeater to share a controller with a RTCM -- is that still an option?
Thank you in advance.
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request@ohnosec.org Sent: Wednesday, December 12, 2012 9:00 AM To: app_rpt-users@ohnosec.org Subject: App_rpt-users Digest, Vol 46, Issue 20
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Re: More Newbie questions (Ken)
----------------------------------------------------------------------
Message: 1 Date: Wed, 12 Dec 2012 05:16:12 -0500 From: "Ken" <ke2n@cs.com> To: "'Dave Miller'" <ve7pke@gmail.com> Cc: App_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] More Newbie questions Message-ID: <003b01cdd851$b7338550$259a8ff0$@cs.com> Content-Type: text/plain; charset="us-ascii"
Curious why you want Limey Linux - I run a standard install on the D525 (and D510) without problems.
73
Ken
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of Dave Miller Sent: Wednesday, December 12, 2012 2:55 AM To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] More Newbie questions
Reading over the documentation it's still unclear if I can run Limey Linux download from Allstar link download page on a IntelD525 motherboard? And what steps do I need to follow? Do I need a running Linux system or can I use an OSX machine to unpack the download from Allstar link page onto a USB drive or a memory card then put the card into the D525 motherboard? I am about to grab some hardware and jump in but not sure yet what I need to grab.
Many thanks Dave VE7PKE
Sent from my iPad _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 46, Issue 20 *********************************************
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users