Doug, I don't personally use DD-WRT, but do know that it supports prioritization by application or port. You'd probably only need to apply priority to UDP port 4569 in the case of Allstar (IAX2) traffic. IAX2 is, in my opinion, superior to SIP in the fact that it only uses one UDP port for both control and data traffic. SIP on the other hand would require you to place priority on UDP port 5060, and UDP ports 10,000 - 20,000 for the RTP traffic. You mentioned in previous posts that you've been working with Asterisk for many years, so I'm sure you're already familiar with the port numbers. It's just in case anyone else was curious. Unfortunately you'd only be able to setup QOS on your LAN, and couldn't control what happens to the traffic once it reaches your upstream provider or the internet. http://www.dd-wrt.com/wiki/index.php/Quality_of_Service#Prioritizing_by_Appl... I hope this helps! On Thu, Dec 12, 2013 at 12:44 AM, Doug Crompton <doug@crompton.com> wrote:
I am curious if anyone has implemeted QOS settings in DD-WRT for Allstar/Asterisk, IRLP, etc. ? If so any recommendations?
*73 DougWA3DSPhttp://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- Andrew Sylthe KC9ONA