You also need to do this to get into your winscp if you are using it.This is after you have enabled root nano /etc/ssh/sshd_config Scroll down to .... Permit root login yes Don't forget to uncomment out the # before the word "Permit" PeteKD2ARB Sent from Yahoo Mail on Android On Mon, Sep 3, 2018 at 13:19, Bob Pyke<k6ecm1@gmail.com> wrote: You have to set one; “sudo” into root, then generate a new root password. Thanks, Bob K6ECM Sent from iPad
On Sep 3, 2018, at 9:58 AM, REDBUTTON_CTRL <jrorke@cogeco.ca> wrote:
Hi All, trying to set up a new RPI node. Using latest rpi Dial release. But need the default root password. Doesn't seem to be listed on the Allstar wiki. the one for Repeater is listed but not root.
Anyone point me in the right direction?
Cant proceed with configuring my node until I have rot password. Used to be debian but I guess it was changed since the last release.
Thanks,
Jon RQ _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.