As we've had some issues with people sending control codes into the system here and linking/unlinking major hubs I'm trying to figure out a better way than just prefixing the functions in rpt.conf with a code prefix (ie *3 becomes *443). Is there a way we can do this on a per user basis? Perhaps setting up a users file with a "PIN" and then requiring a user to "login" with this PIN prior to accepting any control codes? My ideal setup would be have one rpt_users.conf file (which should be changeable with out having to reload asterisk) [users] KB9MCI 12345 KQ4ERT 43567 KB8RET 54321 Then the users would key in #PIN, the system would auth them against the file, and upon authing them, it would respond "CALLSIGN authorized", the courtesy tone would change and the user would have 60 seconds to input the control codes. On the other hand I'd be happy with a way to do this on a per user basis for each command. For Example, *3 for kb9mci would become #12345*3. Anyone have ideas on how to script this sort of a setup? 73's -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net