Larry, I would be happy to ssh into your node and take a look 73, Steve N4IRS On 10/24/2015 07:28 AM, Larry da Ponte wrote:
Hello AllStar users - I'm having poor luck getting an AllStar node on the air. I have a registration number, server and node set up on the web site, and have tried ACID, DIAL, and now DIAL for RPi. I'm using a DMK Engineering URI USB interface cable and a Motorola mobile UHF radio that was working fine with IRLP and Echolink. The problem I'm having with DIAL is that there are no configuration scripts that line up with the documentation that people have written for setting up a new AllStar node. I have what I think are a correctly setup set of asterisk scripts but my node will not show up on the http://stats.allstarlink.org/ on-line nodes page. My node # is 42372. I'm in the CET time zone here in northern Switzerland - is there anyone who would be willing to kill an hour or two with me over Skype to troubleshoot the issue? I have two computers that I could use - one is a fanless brick based on an intel mobile processor and the other is an RPi 2 - I don't really care which one we get going. I have some experience with IRLP and Echolink and have written some custom batch scripts to enhance the nodes so no my way somewhat around Linux. Thanks
73 Larry HB9EYQ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic