Here's another question regarding tail messages, Is it possible to configure app_rpt such that if the main ID file is played during the hang time then the tail message will not be played? I have a main ID file that plays a longer "Welcome to ..." message and then a tail file that just says a quick call sign. However it seems to want to play them both when the timers are both due, and the tail message is unnecessary if the main ID was played already. On 10/29/07, Mark Hagler <markhagler@gmail.com> wrote:
Steve,
I got the card in the mail today and that's what I am using to test with now. Believe me I was very excited to see it so quickly!
My tail messages are working now, I found one minor difference compared to the lines you pasted into e-mail... I had "tailmessages=" configured and not "tailmessagelist=" so a quick fix to the config file and it works.
One of the example configs I downloaded from the CVS repository shows the incorrect "tailmessages" config entry which is how I ended up with that, perhaps it got re-named somewhere along the line.
Anyway it works now, thank you for the help.
On 10/29/07, Stephen Rodgers <hwstar@rodgers.sdcoxmail.com> wrote:
Mark,
This seems to work for me:
tailmessagetime=2000
tailsquashedtime=1000
tailmessagelist=vm-and,vm-and,vm-and
Are you sure that you put it in an active numeric stanza? Also, do you have an idrecording defined, and is it working correctly?
Additionally, I tried using files which didn't exist, and you do get an error message at the console.
Do you have multiple node stanzas in the config file? If you are using the sample config file rpt.conf.sample, that could be the case?
I have app_rpt version 0.76.
P.S. I shipped your card on Saturday.
Steve.
Mark Hagler wrote:
Hello Everyone,
I received the Analog Interface board today in the mail (Steve must have shipped it SUPER priority mail). To play with the software quickly I just connected it via two Yaesu FT-7800R mobile radios (via the 6-pin DATA jacks) and it works very nicely.
One thing that I can't get to work right is tail messages. I put this in my config file:
tailmessagetime=2000 ; Play a tail message every 5 mins tailsquashedtime=1000 ; If squashed by another user tailmessages=tail1,tail2,tail3 ;list of messages to be played for tail message
And I have recorded a sample audio file and copied it three times (tail1.gsm, tail2.gsm, tail3.gsm). It doesn't look like app_rpt is even trying to play tail messages, as in I do not get any errors on the Asterisk console about missing audio files.
Just for testing I set the value to 2 seconds to get it to try to play the files but it's not.
Any thoughts?
Thanks,
Mark _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt