Please check your /etc/asterisk/rpt.conf and make sure your have rxchannel = radio/USB_NODE-NUMBER and NOT rxchannel = SimpleUSB/usb_NODE-NUMBER if using the USBRadio channel driver. Also make sure your have the file /etc/asterisk/usbradio_tune_usb_YOUR-NODENUMBER.conf configured also. if you are editing the files manually. On Fri, Feb 1, 2019 at 3:47 PM Lu V <luvencl8@gmail.com> wrote:
Hello, I tried my first raspberry pie and when I installed from ASL menu, I selected accidentally simple USB instead of radio USB. I went back into the menu and tried to change the drivers to radio USB but it looks like it is not modifying properly? I did find in modules.CONF where it was still loading simple USB. I made the appropriate changes (no load in front of sinple usb and load in front of usb radio but I still cannot run radio-tune-menu. Just wanted to point it out because I think it might be a bug. Has anyone else experienced this? Any tips on how to get this going before I start from scratch?
Lu Vencl KA4EPS _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Nathan Hardman nhardman1428@gmail.com N8THN@ARRL.NET