10 May
2013
10 May
'13
8:51 p.m.
<http://www.batlabs.com/images/gmacc16.gif> Well, according to this link, you are using the external alarm pin, which on a 16 channel radio, can be reprogrammed. I've always used pin 8. N5ZUA ----- Original Message ----- From: "Bill Hurlock" <bill.hurlock@cpcomms.com> To: <app_rpt-users@ohnosec.org> Sent: Friday, May 10, 2013 3:21 PM Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 51, Issue 9
I have checked each of the 3 GM300's I have and each of them goes from 0vdc low (lead open not connected to RTCM) and 13.82vdc HI. This is right off the Accessory plug pin #4. Radio programmed for PL/DPL & CSQ Det.
Bill Hurlock