Good Evening all, I figured I would reach out to all of you too see if anyone can help. Setup: Gm300 Rx and Tx radios DIAL Controller USB interface: RA-40 using usbradio.conf The issue I am having is with the RX audio ( i think) is not coming though on the tx side of the repeater. I know the tx audio is set right, since i can hear the announcements and they are clear. So I took apart the RX radio and move the jumper to position A, so its not de-emphasized audio. Things that i have done with Radio-tune-menu Item #2: Rx squelch set to 543 Item#9 Success Setting=0.436243 meas=7089.0 I tried running Item #3 but didnt seem to get it to work, not sure what I am really suppose to do with that. If anyone can help, please do. Otherwise not sure what the actually numbers mean from item #9, might help my brain to understand whats going on if i knew what those numbers actually represented. So if anyone can help me out, it would a great help to me as i have been beating my head against this problem for a couple days. Thanks -- Joshua Mucinski Jamucins@mtu.edu 616-826-2976 Mechanical Engineer Michigan Technological University Alumi Ham Radio Operator Extra Class - KE8CPD I'm good on QRZ <https://qrz.com/db/KE8CPD> KE8CPD Allstar Hub <http://44.103.33.85> W8LRC <http://w8lrc.org>GRgives <http://grgives.com/>