I believe what he was saying is that you don't want to register IAX with allstar.org and you don't want to enable node status reports to Allstar.org. This has nothing to do with being able to use IAX on a private node. Bill Hurlock From: Jeff Carrier [mailto:k0jsc.jeff@gmail.com] Sent: Tuesday, September 17, 2013 4:03 PM To: Geoff Edmonson Cc: Bill Hurlock; app_rpt mailing list Subject: Re: [App_rpt-users] IAXrtp setup for multiple nodes on one server http://www.xelatec.com/xipar/iaxrpt On Tue, Sep 17, 2013 at 1:58 PM, Geoff Edmonson <ars.w5omr@gmail.com<mailto:ars.w5omr@gmail.com>> wrote: In fact... " Private networks are built with a) node numbers under 2000, b) no iax registration, c) no status reporting and d) the IP address of each of the other nodes is in the nodes stanza." Bill Hurlock <bill.hurlock@cpcomms.com<mailto:bill.hurlock@cpcomms.com>> wrote: I have 2 nodes running on one server. How do I configure IAXrpt to be directed to the right node on the server. One node is 1989 and the other 1990. Bill Hurlock CPCommunications 856-234-1661<tel:856-234-1661> Office 856-264-1010<http://www.totalrf.com/> Cell www.cpcomms.com<http://www.cpcomms.com/> WA2TQI _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users