Correction noted, and saved! Thanks Marshall. I really liked Limey Linux; it did not eat SD cards, and power cycling was not an issue, and seemed to be pretty robust. And, once a working configuration was svcfg'd, you can play around with it. If you rendered it fubar, yank the power plug, and plug it back in. Limey Linux was the real embedded, run from RAM distro. Not sensitive like the current versions. Benjamin, KB9LFZ -----Original Message----- From: Marshall Oldham <ke6pcv@cal-net.org> Reply-to: Users of Asterisk app_rpt <app_rpt- users@lists.allstarlink.org> To: 'Users of Asterisk app_rpt' <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Limey Unix - LATE REPLY Date: Wed, 27 Feb 2019 19:52:30 -0800 Actually very close but it is svcfg 73 Marshall - ke6pcv -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org ] On Behalf Of Benjamin Naber Sent: Wednesday, February 27, 2019 5:10 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Limey Unix - LATE REPLY Didn't see the message until now... if I recall correctly, it was: savecfg the executable(program/script) was located in the same folder as firstime.sh, radio-tune-menu, ... I *think* the sought after command, along with the others, was located in: /usr/sbin Benjamin, KB9LFZ -----Original Message----- From: Todd Lesser <todd@nccom.com> Reply-to: Users of Asterisk app_rpt <app_rpt- users@lists.allstarlink.org> To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] Limey Unix Date: Wed, 26 Dec 2018 15:50:45 -0800 Does anyone know how to save the network configuration in Limey Linux? My node is currently set up as static IP and I want to change it to DHCP. I run net setup but when I reboot, it loses it all. I assume there is a command that will save it to flash memory. Does anyone know what that is? Thanks _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org /cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org /cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org /cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.