Hello All, I have a RF network built out that has various drop repeaters controlled via DTMF. We've been having issues with one of our RF links, so we decided to use 2 RTCM's and an Allstar server to link the sites together via IP instead. This worked great, however I'm having difficulties getting DTMF to pass. On the network we use * and # to control the drop repeaters, so I changed the function characters to: funcchar = A endchar = D, since A and D aren't used on our network. The link is permanently connected so I just wrote a startup macro for node 80: startup_macro = A390DA40 which connects node 80 to 90 and puts 90 into control mode so DTMF passes. The problem is DTMF doesn't pass the other direction. I can't put startup_macro = A380DA40 into node 90's stanza, asterisk complains that the nodes are currently connected. Any ideas how I can do this? Really there is only a handful of commands that need to propagate over the IP link, I read on one of the archived mailing list emails that you can write a COP for every command needed to propagate over the IP link, but I can't figure out how to do that. Any help would be great, Thx, Jesse