I had this wiring written down since I made one for a Yaesu FT2600, which uses same wiring as Alinco. Verify this, as its been a while I did my own wires. And I don't take responsibility if the information is wrong or has changed. Look in the manuals on each product to double check. On DMK Engineering URI: Pin 1 - PTT Pin 8 - COS Pin 20 - GND (Many other pins are also ground) Pin 21 - Audio In Pin 22 - Audio out (left) Pin 23 Audio Out (right) On Yaesu FT2600 (same wiring as Alinco): Pin 1 - COS Pin 4 - Audio Out from radio Pin 5 - Ground Pin 7 - PTT Pin 9 - Audio in to radio On 10/26/2013 10:15 PM, Doug Crompton wrote:
Does anyone have a link for a URI to Alinco connection schematic (DB25-DB9) or for that matter to other radios also. There seems to be a big market for $50+ pre-made cables that use less than $10 in parts for those that don't know how to use a soldering iron. No offense to those trying to make money but some of us would rather do it ourselves. 73 Doug WA3DSP http://www.crompton.com/hamradio
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users