My first guess is that it’s an intermittent RF problem. Sounds like the transmitter is getting into the receiver. That would have a echo due to the short audio delay in the app_rpt repeat path.
On Feb 2, 2015, at 5:57 AM, Geoff <ars.w5omr@gmail.com> wrote:
Weirdness sat in yesterday evening... and even after everything was powered off, unplugged, connections tightened, wires checked and rechecked, computer was 'shutdown -h now', unplugged, caps drained, etc...
restarted everything and all seemed cool, locally.
So, I have 29655 (UHF repeater, usbradio; no-dsp), 29656 (echolink - no hardware) and 29657 (vhf simplex node, TMV-7a using the packet port, 9600-baud [discriminator audio], ctcss from DSP) and all of a sudden, the 2m node went ballistic. Did the resets, made sure the node was on the right frequency, etc, and again, this morning, there was 'echoing' every time the 2m node was unkeyed. Sounded like acoustical feedback. Weirdness!
so... (on uhf) *129657. Have a friend on the other side of town - 2 systems linked together. Dialed the uhf node to friends node. Dialed the vhf rig to the same node ... no echo.
I let it stay like that about a half hour and just now, on vhf disconnected from my friends link, and reconnected 29657 (vhf simplex node) to 29655 (uhf repeater - both nodes on same computer) and ... NO ECHO.
Why?
-Geoff/W5OMR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.