Your complaint of echolink experience should be directed at echolink. Nobody here can control or enforce poxy's proper handling. Your CT settings are all in rpt.conf unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 nolocallinkct=1 ; Use unlinkedct if only connected to a local node & [telemetry] ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ct2=|t(660,880,150,2048) ct3=|t(440,0,150,4096) ct4=|t(550,0,150,2048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ct8=|t(700,1100,150,2048) ;As far as what the numbers mean, ;(0.0.10.0) ; | | | |-------amplitude ; | | |-----------duration ; | |--------------Tone 2 ; |----------------Tone 1 So you might just look at your config for the node and see what CT is the 4 beeps and look for that setting in the node stanza. ...mike/kb8jnm
Le 06/04/2016 23:45, mike@midnighteng.com a écrit :
When you hear some other callsign, it will announce the proxy station and not the proxy user for non direct connects. Some proxy's don't have proper handling and that can screw things up.
I'm quite disappointed with the Echolink module. Despite my tries, I didn't manage to have it work as expected. I'm using the Android Echolink client. I do not have any control about what proxy is used. Sometimes, I hear an unknown callsign. But most of the time, I hear no callsign at all. I never heard *my* callsign ! Am I the only one having this behaviour ?
Moreover, my radio node is connected to a hub. When my Echolink node is also connected to the hub, on the radio, I can hear four quick acute bips before the "normal" bip (remotetx or linkunkeyct). I tried all the CTs, but I didn't find where those are located, and I didn't manage to remove them. When the Echolink node is disconnected from the hub, I do not hear those 4 bips. From where are they coming ? And how to remove / change them ?
Thank you in advance... _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.