John (WB5NFC) wrote:
The irlp update script has been updated inside the irlp-centos-dist.tgz tarball to download tyhe pgp binary from IRLP's webserver. A new tarball was uploaded to dl.allstarlink.org. I've done a dry run and it now downloads the pgp file correctly and completes the install (without sending the order into to the IRLP folks).
Someone now needs to step forward and do a live install and report back on the results of that ;)
Steve WA6ZFT
----
Ran irlpsetup.sh (for reinstall of my old EchoIRLP node). Reinstall seemed to go OK, but I am still unable to connect to IRLP nodes (long wait, then 'connection failed' message). Upon reboot, I did see a message about 'no such command irlp db load...' but it disappeared before I got a good look at it.
John / WB5NFC
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Hi John, I tried this on my system of which IRLP was installed in dry-run mode (without sending install data to the irlp folks), but I didn't see the db load error message. Can you try the following and post the specific error message to the list?: Try commenting out the rc.irlp line in /etc/rc.d/rc.local like this: #/home/irlp/custom/rc.irlp Then run the command manually once you are logged in as root: cd /home/irlp/custom ./rc.irlp This should print out the error message we are looking for... Steve WA6ZFT