okay.. I set the idtime=1000 for testing purposes. I started Asterisk. Ker-chunked the input freq and heard the normal voice id. After that was done, and the repeater Tx had stopped, I keyed-up on the input freq and kept the signal there for a little while and then heard the morse ID, just like I would expect. again... whats the problem?? JIM WB6NIL To: telesistant@hotmail.com Subject: RE: [App_rpt-users] Macros and ID's Date: Wed, 21 Jul 2010 11:04:16 -0400 From: ke2n@cs.com That part works the part that does not seem to work, the same as before, is when somebody has the repeater *already* keyed up at the time an ID is needed. Instead of Morse, it talks all over the QSO in progress (impolitely). I had assumed I made some mistake somewhere when I heard this ... The timeout message (with voice ) ID also talks on top; but that is probably OK - except when you have allegedly disabled the time out ... Ken -----Original Message----- From: Jim Duuuude <telesistant@hotmail.com> To: ke2n@cs.com; Buddy Brannan <buddy@brannan.name> Cc: app_rpt mailing list <app_rpt-users@qrvc.com> Sent: Wed, Jul 21, 2010 10:59 am Subject: RE: [App_rpt-users] Macros and ID's well, thats really strange. I just tested the polite id thing (on 0.255). I start Asterisk. Ker-chunk the system (on the input freq) . It starts voice id. I key up on the input freq and it goes to morse (polite) id. Whats the problem?
From: ke2n@cs.com
To: buddy@brannan.name
Date: Wed, 21 Jul 2010 04:45:45 -0400
CC: App_rpt-users@qrvc.com
Subject: Re: [App_rpt-users] Macros and ID's
With 0.255 I have observed that the talk-over Morse ID is rarely
heard any more. This includes people talking on the local machine.
Back with 0.213 I remember we would hear the voice ID
only if there was no signal on the input.
Another oddball thing related to voce ID is that, if you have the
timeout timer disabled it still plays the voice timeout message and ID
(although it does not drop the PTT). This was in earlier versions too.
Ken
-----Original Message-----
From: app_rpt-users-bounces@qrvc.com [mailto:app_rpt-users-
bounces@qrvc.com] On Behalf Of Buddy Brannan
Sent: Tuesday, July 20, 2010 10:54 PM
To: App_Rpt Mailing List
Subject: [App_rpt-users] Macros and ID's
Hi,
A couple observations; I wonder if anyone else has noticed these, or if
I'm forgetting something important. This is with app_rpt version 0.254:
ID's:
If someone is long-winded (I've noticed this only with incoming links
on Echolink, so not sure if it can be generalized), the standard ID
plays over whoever is talking, even if talkover ID is set.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@qrvc.com
= =