The post was for parallel port but works similar with gpio, You must create a command for on and off. but you must be using radiousb for gpio. Parallel port needs this... iobase=0x378 ;lpt1 Parallel port address (using for cor/ptt & switches +dh-rbi in rpt.conf Personally, I don't hack fobs. But not everyone has a parallel port I guess. You can also get a usb i/o card on ebay and address it to send strings via command if you want to do this larger and cleaner. ...mike/kb8jnm On 6/13/2018 9:53 PM, Scott Weis wrote:
According to the reference in the app_rpt.c:
* 61 - Send Message to USB to control GPIO pins (cop,61,GPIO1=0[,GPIO4=1].....) * 62 - Send Message to USB to control GPIO pins, quietly (cop,62,GPIO1=0[,GPIO4=1].....)
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Mike Sent: Wednesday, June 13, 2018 9:51 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Multiple Cop commands
Bob, I thought I was anonymous LOL
Those old pages... I may have to go back and look... but afraid to since it gets hacked more than I wish to say.
I use it more to record the latest hack techniques.
anyway,
this is from my actual command list with reference. Make sure you use long/longer numbers to avoid commend conflicts in the future and not loose future number possibilities. You can make sequence changes via grouped macro.
8910=cop,61,pp1=0 ;pport pin 1 off --First 3 pins used for DH RBI-1 -data-clock-reset 8911=cop,61,pp1=1 ;pport pin 1 on -- 8920=cop,61,pp2=0 ;pport pin 2 off -- 8921=cop,61,pp2=1 ;pport pin 2 on -- 8930=cop,61,pp3=0 ;pport pin 3 off -- 8931=cop,61,pp3=1 ;pport pin 3 on -- 8940=cop,61,pp4=0 ;pport pin 4 off 8941=cop,61,pp4=1 ;pport pin 4 on 8950=cop,61,pp5=0 ;pport pin 5 off 8951=cop,61,pp5=1 ;pport pin 5 on 8960=cop,61,pp6=0 ;pport pin 6 off 8961=cop,61,pp6=1 ;pport pin 6 on 8970=cop,61,pp7=0 ;pport pin 7 off 8971=cop,61,pp7=1 ;pport pin 7 on 8980=cop,61,pp8=0 ;pport pin 8 off 8981=cop,61,pp8=1 ;pport pin 8 on ;XXX=cop,61,PP4=1 ; EX: Parallel Port Pin 4 1=(high-true) 0=(low/off) ;xxx=cop,62 as above -quite telemetry-
...mike/kb8jnm
On 6/13/2018 8:45 PM, Bob Pyke wrote:
It seems to me it should look more like:
[function]
991=cop,61,gpio1=0 992=cop,61,gpio4=1 993=cop,61,gpio5=0
[macro]
30=*991 *992 *993 #
See Mike’s page, themidnightengineer.com
Thanks, Bob k6ecm 73 Sent from my iPhone
On Jun 13, 2018, at 4:19 PM, John Rudolph- N2YP <John@n2yp.com> wrote:
When using cop 61 or 62 to change gpio states can you change more than one pin with the same command or do you have to break it out as one pin at a time? Example: cop,61,GPIO1=0,GPIO4=1,GPIO5=1
If so is this the right format and if not what would it be? _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.