Good point. I had bumped it up to 5 because Asterisk will stop after several days, and I'm trying to capture the reason. The only way I can get it going again is a reboot. I'm running Pickle on a Beagleboard XM. Thanks, Bob kk6ecm Sent from iPad
On Sep 13, 2014, at 9:56 PM, Jim Duuuude <telesistant@hotmail.com> wrote:
These are normal messages. Dont worry about them. Normally, people run their verbose level lower then whatever you have it set to, and dont see them. What verbose level are you running at?
Jim
From: kk6ecm@gmail.com To: app_rpt-users@ohnosec.org Date: Sat, 13 Sep 2014 21:12:57 -0700 Subject: Re: [App_rpt-users] Multiple requests for registration
Why is it sending a “registry rereqquest? ”Should I be receiving some sort of confirmation (feedback of success)?
Thanks,
Bob
kk6ecm
From: outlook_97fc649978f54bf0@outlook.com [mailto:outlook_97fc649978f54bf0@outlook.com] On Behalf Of Doug Crompton Sent: Friday, September 12, 2014 5:35 PM To: Bob Cc: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Multiple requests for registration
The registration interval is 60 seconds hard coded in the source. So what you see is normal.
73 Doug WA3DSP http://www.crompton.com/hamradio
From: kk6ecm@gmail.com To: App_rpt-users@ohnosec.org Date: Fri, 12 Sep 2014 17:02:30 -0700 Subject: [App_rpt-users] Multiple requests for registration
My servers are constantly sending registration request and rereqquests. I check two different ones on two different IP addresses at two different locations, although the same ISP. I don’t ever remember this happening this much, at this frequency. I’m wondering if there is something I need to fix.
Also, is the frequency of these requests adjustable on my end, and is it anything I need to do?
The data below is from one server. The other server looks pretty much the same. This one also has Echolink, and I get an Echolink update occasionally interspersed between large groups of the warnings shown below.
Thanks,
Bob
kk6ecm
[Sep 12 23:48:34] WARNING[456]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '29009'
[Sep 12 23:48:34] WARNING[459]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest
[Sep 12 23:48:44] WARNING[452]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '28765'
[Sep 12 23:48:45] WARNING[454]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest
[Sep 12 23:49:24] WARNING[459]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '29009'
[Sep 12 23:49:24] WARNING[458]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest
[Sep 12 23:49:35] WARNING[454]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '28765'
[Sep 12 23:49:35] WARNING[456]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.